Vector Sunglasses: Photochromic Lens Z87+

Each pair meets or exceeds Z87+ Standards right out the box.

Our lens is injection molded from thick 1.9mm shatter-resistant polycarbonate that is built to withstand Z87 Mass Impact Standards.

Integrated side-shields provide lateral protection and allow the frame to meet ANSI Z87+ requirements.

Each pair of Vector is boldly marked Z87+ on the frame, arm and lens.

Disclaimer: Removing arms, and or changing configuration in any way voids Z87 compliance.

Rubberized Hytrel® (TPC-ET thermoplastic elastomer) touchpoints on the nose & arms provide a comfortable, non-slip fit that you can wear seamlessly all day long.

Low profile dual injected arms have been designed for performance across all conditions, allowing for a better fit with headwear from hats, helmets, and hearing protection.

Hytrel® inserts provide a higher resistance to both natural and man-made chemical agents increasing durability and longevity.

The Vector uses a replaceable (tool free) shatter resistant mass-impact rated 2mm thick cylindrical shield lens, that is visually broken in two with a louvered nose bridge that locks the lens in place. The rest of the frame is obscured from view behind the lens, where you will find two minimal lens clips protruding through the lens that further secure the lens to the frame’s side shields.

Specifications by the numbers:

The variable tint range of these lenses adjusts from a very clear 75% to a very chill 17% VLT of darkness, all in under 30 seconds. So when you're inside your garage grinding off all the bubblegum welds from a sweet barn find C10, you'll have crystal clear, z87 protection. When it's time to jam outside for the 5th Home Depot run of the day, the lenses will smoothly transition from clear to grey in a matter of seconds.

While these will NOT get as dark as our standard Black lenses. We picked a transition lens to provide ideal clarity indoors and as dark as possible outdoors to maximize the wearer's utility of this eyewear.

1.9mm thick Polycarbonate lens that meets or exceeds mass impact requirements for Z87 standards, injection molded to the highest standards and tested to ensure optimal clarity, along with color and light transmission standards.

Lenses are U6:L3 UV400 - 100% UVA / UVB blocking

Photochromic Lens VLT = 75%-17% / Cat 1-3